R/C Tips & Tricks
Body
- Masking Tips
In order to cut different designs and patterns out of masking tape or masking material, you can use
pinking shears (which are normally used for cutting fabric). The shears are available in different cut
patterns like jagged edges, waves, etc. The designs can be used to quickly and easily customise any
paint job. Use a high-quality masking tape or masking material for the best results.
- Wing Tricks
On your off-road buggy, there is one tuning feature that is often overlooked. It is your spoiler; more
often called a wing. The angle or position of your buggy’s spoiler can have a big effect on how your
car handles. Having a steeper angle on the spoiler will create more rear downforce. At medium to
high speeds, your car will have more rear traction. If the car was oversteering, you might induce
understeer, and vice-versa. Also, watch how your buggy is jumping. If it nosedives off the jumps, try
putting a steeper angle on the spoiler. And last but not least, if your buggy lags a bit on the straight
sections, try flattening the wing angle. With some patience and practice, your buggy’s spoiler can be
a great tuning aid.
- Find Those Body Holes
When mounting a painted body, put grease on the body posts and set the body on. Lift the body up
and grease marks the spot where the holes should be drilled.
- Body Clip Storage
Take an old body mount and drill more holes in it to keep your spare body clips on.
- Body Cushions
Make body cushions by drilling a hole through old foam earplugs and cutting them down to fit.
- Applying Decals
To apply decals, spray the surface with Windex first, and then put the decal on. Now you can slide it
around to find the perfect spot. After it is situated, apply pressure to push the Windex out from under
the decal.
- Broken Body Post
Have a broken body post? Glut it together and put a pen tube over it for support.
- Body Cushions 2
Take old fuel line from a car, cut a 1/8th inch piece, and use it as a body cushion.
<<< Previous | Next >>>
|
|
